|
|
Post by primdog on Feb 4, 2021 10:58:24 GMT
Version: LinuxTT_GM5p_amd64_r3_15.12.20.iso
Tried with MX Tools USB creator and balenaEtcher. Neither work and the latter states the ISO has no partition table and is not bootable.
|
|
|
|
Post by Support on Feb 4, 2021 18:28:15 GMT
1. LinuxTT_GM5p_amd64_r3_15.12.20.iso - Size: 2 827 796 480 If NOT matches GoTo Download again Else GoTo 2. 2. Try start any VirtualMachine with LinuxTT_GM5p_amd64_r3_15.12.20.iso PS: Rufus work 100% PS2: VirtualMachine for VirtualBox - WinXP + Rufus link linux-tt.com/files/rufus/VB_RufusXP_2.18.7zVirtualBox Setup: 1. Install VirtualBox 2. add user to vboxusers to enable USB usage. console: sudo usermod -aG vboxusers $USER 2.1 restart or relogin 3. Extract the archive 4. Add Virtual_HDD to VirtualBox |
|
|
|
Post by primdog on Feb 5, 2021 7:00:40 GMT
Thank you for responding.
The downloaded ISO file is totally fine.
I don't use Windows nor do I suspect most others who would want to test your distro using a live session and then likely install it so unless it's possible to create a bootable USB using one of the standard Linux tools from balena, MX, ROSA, SUSE etc your project is not going to proceed very far.
|
|
|
|
Post by Support on Feb 5, 2021 14:37:22 GMT
|
|
|
|
Post by primdog on Feb 7, 2021 20:29:23 GMT
Thanks for this. It now boots on 3 of my 5 machines but still not the Dell OptiPlex or Intel NUC. |
|
|
|
Post by Support on Feb 8, 2021 10:24:47 GMT
If it is not difficult for you, please give more information about Dell OptiPlex or Intel NUC.
Parameters and what problems when trying to start.
|
|
|
|
Post by nab on Feb 8, 2021 17:58:59 GMT
Wont even boot on asus e200ha netbook.
Will live boot on my desktop but fills the usb drive with log fills.
no way to add any boot params on boot login screen
|
|
|
|
Post by Support on Feb 8, 2021 18:35:18 GMT
nab
It is necessary to find out if this is a problem with the ISO image or the USB flash drive is not being assembled correctly.
Please try all three
1. Rufus(Write in ISO mode),(following the example of the second post if you don't have a Windows computer)
2. ROSA ImageWriter -Clear -> Write
3. balenaEtcher
Perhaps there is a problem of incompatibility between a flash drive and a laptop?
You may need to change the parameter in the BIOS from UEFI to Legacy
EFI boot image will appear in future repacks
Please try, and if all this does not work, we will think about what else can be done
|
|
